Renault Clio Sport 172 182 Cup 197 200 Braided Hose Engine Oil Cooler Kit Zqmk

Renault Clio Sport 172 182 Cup 197 200 Braided Hose Engine Oil Cooler Kit Zqmk
Renault Clio Sport 172 182 Cup 197 200 Braided Hose Engine Oil Cooler Kit Zqmk
Renault Clio Sport 172 182 Cup 197 200 Braided Hose Engine Oil Cooler Kit Zqmk
Renault Clio Sport 172 182 Cup 197 200 Braided Hose Engine Oil Cooler Kit Zqmk
Renault Clio Sport 172 182 Cup 197 200 Braided Hose Engine Oil Cooler Kit Zqmk

Renault Clio Sport 172 182 Cup 197 200 Braided Hose Engine Oil Cooler Kit Zqmk
MLR RENAULT CLIO -10. Engines With Metal Spin On Oil Filters Only. Clio 2.0 inc RS models. Not suitable for paper element/cartridge oil filters. OIL COOLER KITS AVAILABLE FOR MOST MAKES & MODELS – PLEASE SEE OUR SHOP ITEMS. Mocal 10 row oil cooler m. Mocal oil filter sandwich plate & seal. 2x Sandwich plate adaptors & washers. Stainless Steel braided high pressure/temperature oil hose. 2x MLR red & blue straight & 2x 90° unions. Universal mounting brackets & fixings. In very cold/wet weather over cooling of the oil can be avoided by the addition of a thermostat built into the sandwich plate. Or the sandwich plate can be supplied with one gauge port. It is not possible to have a thermostat and a gauge port in the same sandwich plate. The hose and fittings supplied in this kit are designed for self assembly. The hoses can be made to the correct length to suit the individual application. A vice and spanner are all that’s needed to assemble professional, reliable hoses. 10 size hose and fittings are supplied in this kit to minimise oil pressure loss through the system. We do not recommend hose/fittings smaller than this are used on these models. Kit is also available with black Nylon. The kit can be supplied with an extra 1 or 2 meters of hose. FOR ADDITIONAL HOSE / FITTINGS – PLEASE SEE OUR SHOP ITEMS. Rough Guide: A 13 row cooler should be adequate to cool most naturally aspirated engines up to around 150bhp (for track use) given an installation with good airflow, after this a larger cooler will be required. For road use a 13 row oil cooler is usually adequate for engines up to approx 200bhp in all but extreme conditions, after this a larger cooler will be required. The overall width including mounting brackets is 330mm. Exact cooler size required depends upon: The type of use, ambient temperature, spec of the engine (internal friction, rev range, power etc), airflow through the cooler and over the sump. If you are using your car for any form of track, competition or high performance use then the engine oil will need cooling. The most common cause of competition / high performance engine failure is loss of oil pressure, as the oil heats up it becomes thinner. This lowers the pressure produced by the pump and increases the oil escape from the bearings lowering the overall pressure further still. Roughly speaking you need about 10psi of oil pressure per 1000rpm. 7000rpm requires 70psi oil pressure. If the pump cannot meet this demand when the oil is hot/thin engine failure will result – usually in the form of running a crank bearing (death rattle) or throwing a rod through the side of the block! This is especially important on part worn engines – a cooler/thicker oil will give the oil pump a fighting good chance of meeting the demand. On a new or part worn engine if the oil pressure is maintained, the engine isn’t over revved or over heated there is no reason for failure. For track, competition or high performance use a rough target temperature for the oil is around 100°C. Over 100°C the oil thins out rapidly and therefore drops the pressure. Turbo systems will rocket the oil temperature. An amended invoice will then be sent. Designed for Motorsport use. No instructions are included. (Some fitting tips & tightening torques are included). PLEASE VIEW MY SHOP ITEMS. (The despatch date will be printed on the parcel address label). (Due to address queries/bad weather/locational errors etc). We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 9-5), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated if products fit other models its in our favour to say so! Are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated. Please allow 24h for us to respond to your question. Please also note the despatch. Times stated on the listing. Most of our products are NOT designed for DIY fitting and in some cases instructions are not included – we state this when applicable. We do not prioritise feedback, due the time consuming nature of the feedback we do them in blocks of 2-300 at a time after orders have been sent & questions answered. Despatching orders & answering questions are our first & second priority. Please be assured feedback will be left at our earliest convenience. The item “RENAULT CLIO SPORT 172 182 CUP 197 200 BRAIDED HOSE ENGINE OIL COOLER KIT ZQMK” is in sale since Tuesday, November 14, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Engine Cooling Components\Engine Oil Coolers & Lines”. The seller is “mattyzx” and is located in Dorking. This item can be shipped worldwide.
  • Type: Oil Cooler & Line Kit
  • Manufacturer Part Number: ZQMK-M20
  • Brand: MLR
  • Outlet Diameter: -10JIC
  • Performance Part: Yes
  • Classic Car Part: No
  • Country/Region of Manufacture: United Kingdom
  • Finish: Painted
  • Item Length: 330mm
  • Item Height: 77mm
  • Reference OE/OEM Number: n/a
  • Item Width: 51mm
  • Mounting Style: Bolt-On
  • Pressure Rating: 11 bar
  • Universal Fitment: Yes
  • End Fitting Type: Male Threaded
  • Material: Aluminium
  • Manufacturer Warranty: 1 Year
  • Inlet Diameter: -10JIC
  • Items Included: Fixing Bolt
  • Features: 100% Leak tested

Renault Clio Sport 172 182 Cup 197 200 Braided Hose Engine Oil Cooler Kit Zqmk

Premium 34 Bottle Wine Cooler Chiller Fridge Refrigerator Beverage Led Black New

Premium 34 Bottle Wine Cooler Chiller Fridge Refrigerator Beverage Led Black New
Premium 34 Bottle Wine Cooler Chiller Fridge Refrigerator Beverage Led Black New
Premium 34 Bottle Wine Cooler Chiller Fridge Refrigerator Beverage Led Black New

Premium 34 Bottle Wine Cooler Chiller Fridge Refrigerator Beverage Led Black New
Premium 34 Bottle Wine Cooler Chiller Fridge Refrigerator Beverage Led Black New. Keep wine tasting wonderful with this. It comes in a sleek black color and has an LED display and touch controls that make it easy to keep favorite wines at the ideal drinking temperature. This premium wine cooler is a unit that employs compressor chilling technology for faster cooling speed, high cooling efficiency and stable temperature control. This cooler features a see-through glass door and interior LED to display a collection and add to the style. The glass door wine cooler includes slide-out shelves that make it simple to select just the right bottle for the occasion. The configuration of the shelves permits chilling up to 34 wine bottles lying on their sides. Utilize this Arctic King 34-Bottle Wine Cooler at home or in restaurant and hotel settings to offer wine to guests at parties and on special occasions. Adjustable legs for leveling. Temperature range: 5 degrees Celsius to 18 degrees Celsius, and 41 degrees Fahrenheit to 64 degrees Fahrenheit. Dimensions: 18.9″L x 17.3″W x 33.2H. The item “Premium 34 Bottle Wine Cooler Chiller Fridge Refrigerator Beverage Led Black New” is in sale since Wednesday, July 8, 2020. This item is in the category “Home & Garden\Major Appliances\Refrigerators & Freezers\Wine Fridges & Cellars”. The seller is “createmagic14″ and is located in multiple, locations. This item can be shipped to United States.
  • Custom Bundle: No
  • Smart Home Compatibility: does not apply
  • Capacity: 34 wine bottles
  • Operating Sound Rating: unknown
  • EC Range: see description
  • Door Style: Single Door
  • MPN: AWCA034ADB
  • Energy Star: Compliant
  • Item Height: 33 in
  • Color: Black
  • Brand: Arctic King
  • Bottle Capacity: 26-37
  • Number of Shelves: 7
  • Number of Doors: 1
  • Features: Adjustable Thermostat
  • Installation: Freestanding
  • Type: Compressor
  • Model: Arctic King AWCA034ADB

Premium 34 Bottle Wine Cooler Chiller Fridge Refrigerator Beverage Led Black New

Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC

Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC
Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC
Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC
Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC
Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC
Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC
Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC
Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC
Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC
Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC
Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC

Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC
Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC. SWAMP COOLER – This powerful fan and evaporative cooler offers two ways to cool your personal space. FEATURES – With 3 fan speeds, 3 cooling modes and an automatic timer, this air humidifier has is all. ECO-FRIENDLY – Instead of freon and other chemicals, get climate control that uses clean evaporation. QUALITY – This portable air conditioner is made with quality materials, to keep you comfy all day. NEWAIR – With good quality products and excellent customer service, NewAir is a name you can trust. Keep cool all summer long with this powerful compact fan and cool humidifier that provides up to 100 square feet of cooling coverage. Featuring three fan speeds, three cooling modes, and an automatic timer, this evaporative humidifier and fan offers many ways to cool your personal space. This swamp cooler is also energy-efficient and eco-friendly. Instead of freon and other chemicals, get climate control that uses clean water evaporation. This unit uses a large, easy to refill 1-gallon water tank for evaporative cooling in arid climates, and also features a 310 CFM fan, allowing you to use both features together, or one at a time. Either way, you’ll enjoy cool breezes and plenty of great features in a small package. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. Save Space While Staying Cool. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. Who says an evaporative cooler has to be big and bulky? The stylish AF-310 fits into a compact 11.5 by 13 inch footprint. Its slim design fits nearly anywhere and cools up to 100 square feet of space with ease. A Breath of Fresh Air for Desert Dwellers. Stay cool during hot, dry weather with the power of evaporative cooling. With the AF-310, you can lower the indoor temperature by as much as 20 degrees and keep refreshing breezes blowing all summer long. Climate Control Just the Way You Like It. To oscillate or not to oscillate? The choice is yours, along with three fan speeds and three different cooling modes. Turn the AF-310 on full blast for 310 CFMs of power, or toggle between evaporative cooling and the fan at the push of a button. WE WILL CONTINUE OUR BEST TO SERVE YOU AS BEST AS WE CAN. WE THANK YOU FOR YOUR UNDERSTANDING AND PATIENCE DURING THIS TIME&#######xA0. DEBIDO A LAS CONDICIONES ACTUALES, NO HAY FECHA DE ENTREGA GARANTIZADA. LA ENTREGA PUEDE SER ENTRE 3 D&#######xCD;AS DESPU&#######xC9;S DE LA COMPRA HASTA UN MES. ESTAMOS TRABAJANDO PARA ENTREGAR NUESTROS ART&#######xCD;CULOS A NUESTROS CLIENTES LO M&#######xC1;S R&#######xC1;PIDO POSIBLE. SIN EMBARGO, LOS SERVICIOS DE ENV&#######xCD;O SE HAN MINIMIZADO, Y ESO HA AFECTADO NUESTROS SERVICIOS DE ENTREGA. CONTINUAREMOS NUESTRO MEJOR PARA SERVIRLE LO MEJOR QUE PODEMOS. GRACIAS POR SU ENTENDIMIENTO Y PACIENCIA DURANTE ESTE TIEMPO. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. ABOUT US We offer the best prices around on high quality products. The item “Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC” is in sale since Monday, August 31, 2020. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Indoor Air Quality & Fans\Portable Fans”. The seller is “silvercurve” and is located in Denver, Colorado. This item can be shipped to United States.
  • Brand: Unknown
  • Item model number: AF-310
  • ISBN: Does not apply
  • Power Source: Electric
  • Item Width: 20 in (508 cm)
  • Country/Region of Manufacture: United States
  • Finish Types: Black
  • Type: Pedestal/Standing
  • Number of Pieces: 1
  • EAN: 0313023976932
  • Product Dimensions: 1263 x 1168 x 345 inches
  • Material: [‘Plastic’ ‘Iron’]
  • Item Depth: 20 in (508 cm)
  • Is Discontinued By Manufacturer: No
  • Manufacturer: Visit the NewAir Store
  • Batteries Required: No
  • UPC: 7445035032078
  • Item Weight: 116 pounds
  • Import Designation: Made in USA or Imported
  • Model: AF-310
  • Features: Timer
  • Item Height: 20 in (508 cm)
  • MPN: Does not apply
  • Item Diameter: 20 in (508 cm)
  • Color: Does not apply
  • Is Assembly Required?: No
  • Number of Blades: 3

Portable Room Air Conditioner Indoor Cooler Fan Humidifier Conditioning Units AC

34 Bottle Wine Cooler LED Refrigerator Freestanding Fridge Chiller Cellar Rack

34 Bottle Wine Cooler LED Refrigerator Freestanding Fridge Chiller Cellar Rack
34 Bottle Wine Cooler LED Refrigerator Freestanding Fridge Chiller Cellar Rack
34 Bottle Wine Cooler LED Refrigerator Freestanding Fridge Chiller Cellar Rack
34 Bottle Wine Cooler LED Refrigerator Freestanding Fridge Chiller Cellar Rack
34 Bottle Wine Cooler LED Refrigerator Freestanding Fridge Chiller Cellar Rack
34 Bottle Wine Cooler LED Refrigerator Freestanding Fridge Chiller Cellar Rack
34 Bottle Wine Cooler LED Refrigerator Freestanding Fridge Chiller Cellar Rack
34 Bottle Wine Cooler LED Refrigerator Freestanding Fridge Chiller Cellar Rack

34 Bottle Wine Cooler LED Refrigerator Freestanding Fridge Chiller Cellar Rack
34 Bottle Wine Cooler LED Refrigerator Freestanding Fridge Chiller Cellar Rack. Keep wine tasting wonderful with this Arctic King 34-Bottle Wine Cooler. It comes in a sleek black color and has an LED display and touch controls that make it easy to keep favorite wines at the ideal drinking temperature. This Arctic King premium wine cooler is a unit that employs compressor chilling technology for faster cooling speed, high cooling efficiency and stable temperature control. This cooler features a see-through glass door and interior LED to display a collection and add to the style. The glass door wine cooler includes slide-out shelves that make it simple to select just the right bottle for the occasion. The configuration of the shelves permits chilling up to 34 wine bottles lying on their sides. Utilize this Arctic King 34-Bottle Wine Cooler at home or in restaurant and hotel settings to offer wine to guests at parties and on special occasions. Arctic King Premium 34-Bottle Wine Cooler. Adjustable legs for leveling. Temperature range: 5 degrees Celsius to 18 degrees Celsius, and 41 degrees Fahrenheit to 64 degrees Fahrenheit. Dimensions: 18.9″L x 17.3″W x 33.2H. 66 lbs Arctic King premium wine cooler. It will add a touch of class to the celebration while preserving a wonderful commodity for those who enjoy the finer things in life. The item “34 Bottle Wine Cooler LED Refrigerator Freestanding Fridge Chiller Cellar Rack” is in sale since Friday, August 27, 2021. This item is in the category “Home & Garden\Major Appliances\Refrigerators & Freezers\Wine Fridges & Cellars”. The seller is “urloverboy42004″ and is located in Sugar Land, Texas. This item can be shipped to United States.
  • Model: AWCA034ADB
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Bottle Capacity: 34
  • Item Height: 33.20 in
  • Item Width: 17.30 in
  • Capacity: 34 bottles
  • Installation: Freestanding
  • Type: Compressor
  • Features: LED Lighting
  • Color: Black
  • MPN: AWCA034ADB
  • Finish: Black Stainless Steel
  • Door Style: Single Door
  • Brand: The Arctic King A+
  • Number of Doors: 1

34 Bottle Wine Cooler LED Refrigerator Freestanding Fridge Chiller Cellar Rack

Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest with Removable Tray

Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest with Removable Tray
Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest with Removable Tray
Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest with Removable Tray
Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest with Removable Tray
Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest with Removable Tray
Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest with Removable Tray
Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest with Removable Tray
Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest with Removable Tray
Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest with Removable Tray
Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest with Removable Tray

Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest with Removable Tray
Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest w/ Removable Tray. This item is in great condition, considering its age, with there being some dents (found on the lid) and a few scratches/rust spots. Tray and inside show no signs of rust. 19 tall (to top of handle) x 18 wide x 13 deep. The item “Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest with Removable Tray” is in sale since Sunday, October 10, 2021. This item is in the category “Collectibles\Advertising\Soda\Royal Crown/Nehi/Diet Rite”. The seller is “njwinger” and is located in Bulger, Pennsylvania. This item can be shipped to United States.
  • Brand: RC Cola
  • Color: Yellow
  • Original/Reproduction: Original
  • Featured Refinements: Royal Crown Cola
  • Country/Region of Manufacture: United States

Vintage 1950s Royal Crown Cola Yellow Metal Cooler Ice Chest with Removable Tray

Seat Ibiza Leon Cupra R 1.8 20v Turbo 2.0 Mocal Braided Hose Oil Cooler Kit Zqk

Seat Ibiza Leon Cupra R 1.8 20v Turbo 2.0 Mocal Braided Hose Oil Cooler Kit Zqk
Seat Ibiza Leon Cupra R 1.8 20v Turbo 2.0 Mocal Braided Hose Oil Cooler Kit Zqk
Seat Ibiza Leon Cupra R 1.8 20v Turbo 2.0 Mocal Braided Hose Oil Cooler Kit Zqk
Seat Ibiza Leon Cupra R 1.8 20v Turbo 2.0 Mocal Braided Hose Oil Cooler Kit Zqk
Seat Ibiza Leon Cupra R 1.8 20v Turbo 2.0 Mocal Braided Hose Oil Cooler Kit Zqk

Seat Ibiza Leon Cupra R 1.8 20v Turbo 2.0 Mocal Braided Hose Oil Cooler Kit Zqk
Engines With Metal Spin On Oil Filters Only. Leon 1.8 Turbo / 2.0. Ibiza 1.8 Turbo. Not suitable for V5/V6/VR6 or diesel engines. Not suitable for paper element/cartridge oil filters. Mocal -10 oil cooler kit with genuine Aeroquip red & blue or black reusable fittings and stainless steel braided or kevlar reinforced lightweight black motorsport hose. 10 row oil cooler m. Oil filter sandwich plate & seal. 2x sandwich plate adaptors & washers. Stainless Steel braided high pressure/temperature oil hose. 2x Aeroquip red & blue straight & 2x. Universal mounting brackets & fixings. In very cold/wet weather over cooling of the oil can be avoided by the addition of a thermostat built into the sandwich plate. Or the sandwich plate can be supplied with one gauge port. It is not possible to have a thermostat and a gauge port in the same sandwich plate. The hose and fittings supplied in this kit are designed for self assembly. The hoses can be made to the correct length to suit the individual application. A vice and spanner are all that’s needed to assemble professional, reliable hoses. 10 size hose and fittings are supplied in this kit to minimise oil pressure loss through the system. We do not recommend hose/fittings smaller than this are used on these models. Kit is also available with Aeroquip Startlite black hos. The kit can be supplied with an extra 1 or 2 meters of hose. FOR ADDITIONAL HOSE / FITTINGS – PLEASE SEE OUR SHOP ITEMS. Rough Guide: A 13 row cooler should be adequate to cool most naturally aspirated engines up to around 150bhp (for track use) given an installation with good airflow, after this a larger cooler will be required. For road use a 13 row oil cooler is usually adequate for engines up to approx 200bhp in all but extreme conditions, after this a larger cooler will be required. The overall width including mounting brackets is 330mm. Exact cooler size required depends upon: The type of use, ambient temperature, spec of the engine (internal friction, rev range, power etc), airflow through the cooler and over the sump. If you are using your car for any form of track, competition or high performance use then the engine oil will need cooling. The most common cause of competition / high performance engine failure is loss of oil pressure, as the oil heats up it becomes thinner. This lowers the pressure produced by the pump and increases the oil escape from the bearings lowering the overall pressure further still. Roughly speaking you need about 10psi of oil pressure per 1000rpm. 7000rpm requires 70psi oil pressure. If the pump cannot meet this demand when the oil is hot/thin engine failure will result – usually in the form of running a crank bearing (death rattle) or throwing a rod through the side of the block! This is especially important on part worn engines – a cooler/thicker oil will give the oil pump a fighting good chance of meeting the demand. On a new or part worn engine if the oil pressure is maintained, the engine isn’t over revved or over heated there is no reason for failure. For track, competition or high performance use a rough target temperature for the oil is around 100°C. Over 100°C the oil thins out rapidly and therefore drops the pressure. Turbo systems will rocket the oil temperature. An amended invoice will then be sent. Designed for Motorsport use. No instructions are included. (Some fitting tips & tightening torques are included). PLEASE VIEW MY SHOP ITEMS. (The despatch date will be printed on the parcel address label). (Due to address queries/bad weather/locational errors etc). We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 9-5), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated if products fit other models its in our favour to say so! Are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated. Please allow 24h for us to respond to your question. Please also note the despatch. Times stated on the listing. Most of our products are NOT designed for DIY fitting and in some cases instructions are not included – we state this when applicable. We do not prioritise feedback, due the time consuming nature of the feedback we do them in blocks of 2-300 at a time after orders have been sent & questions answered. Despatching orders & answering questions are our first & second priority. Please be assured feedback will be left at our earliest convenience. The item “SEAT IBIZA LEON CUPRA R 1.8 20V TURBO 2.0 MOCAL BRAIDED HOSE OIL COOLER KIT ZQK” is in sale since Friday, August 11, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Engine Cooling Components\Engine Oil Coolers & Lines”. The seller is “mattyzx” and is located in Dorking. This item can be shipped worldwide.
  • Country/Region of Manufacture: United Kingdom
  • Type: Oil Cooler Kit
  • Manufacturer Part Number: ZQK-3/4UNF
  • Brand: Mocal

Seat Ibiza Leon Cupra R 1.8 20v Turbo 2.0 Mocal Braided Hose Oil Cooler Kit Zqk

Vw Golf 1.8 Turbo 2.0 Gti Stainless Braided Hose Engine Oil Cooler Kit Zqmk

Vw Golf 1.8 Turbo 2.0 Gti Stainless Braided Hose Engine Oil Cooler Kit Zqmk
Vw Golf 1.8 Turbo 2.0 Gti Stainless Braided Hose Engine Oil Cooler Kit Zqmk
Vw Golf 1.8 Turbo 2.0 Gti Stainless Braided Hose Engine Oil Cooler Kit Zqmk
Vw Golf 1.8 Turbo 2.0 Gti Stainless Braided Hose Engine Oil Cooler Kit Zqmk
Vw Golf 1.8 Turbo 2.0 Gti Stainless Braided Hose Engine Oil Cooler Kit Zqmk

Vw Golf 1.8 Turbo 2.0 Gti Stainless Braided Hose Engine Oil Cooler Kit Zqmk
Engines With Metal Spin On Oil Filters Only. Golf 1.8 Turbo / 2.0. Not suitable for V5/V6/VR6 or diesel engines. Not suitable for paper element/cartridge oil filters. OIL COOLER KITS AVAILABLE FOR MOST MAKES & MODELS – PLEASE SEE OUR SHOP ITEMS. Mocal 10 row oil cooler m. Mocal oil filter sandwich plate & seal. 2x sandwich plate adaptors & washers. Stainless Steel braided high pressure/temperature oil hose. 2x MLR red & blue straight & 2x 90° unions. Universal mounting brackets & fixings. In very cold/wet weather over cooling of the oil can be avoided by the addition of a thermostat built into the sandwich plate. Or the sandwich plate can be supplied with one gauge port. It is not possible to have a thermostat and a gauge port in the same sandwich plate. The hose and fittings supplied in this kit are designed for self assembly. The hoses can be made to the correct length to suit the individual application. A vice and spanner are all that’s needed to assemble professional, reliable hoses. 10 size hose and fittings are supplied in this kit to minimise oil pressure loss through the system. We do not recommend hose/fittings smaller than this are used on these models. Kit is also available with black Nylon. The kit can be supplied with an extra 1 or 2 meters of hose. FOR ADDITIONAL HOSE / FITTINGS – PLEASE SEE OUR SHOP ITEMS. Rough Guide: A 13 row cooler should be adequate to cool most naturally aspirated engines up to around 150bhp (for track use) given an installation with good airflow, after this a larger cooler will be required. For road use a 13 row oil cooler is usually adequate for engines up to approx 200bhp in all but extreme conditions, after this a larger cooler will be required. The overall width including mounting brackets is 330mm. Exact cooler size required depends upon: The type of use, ambient temperature, spec of the engine (internal friction, rev range, power etc), airflow through the cooler and over the sump. If you are using your car for any form of track, competition or high performance use then the engine oil will need cooling. The most common cause of competition / high performance engine failure is loss of oil pressure, as the oil heats up it becomes thinner. This lowers the pressure produced by the pump and increases the oil escape from the bearings lowering the overall pressure further still. Roughly speaking you need about 10psi of oil pressure per 1000rpm. 7000rpm requires 70psi oil pressure. If the pump cannot meet this demand when the oil is hot/thin engine failure will result – usually in the form of running a crank bearing (death rattle) or throwing a rod through the side of the block! This is especially important on part worn engines – a cooler/thicker oil will give the oil pump a fighting good chance of meeting the demand. On a new or part worn engine if the oil pressure is maintained, the engine isn’t over revved or over heated there is no reason for failure. For track, competition or high performance use a rough target temperature for the oil is around 100°C. Over 100°C the oil thins out rapidly and therefore drops the pressure. Turbo systems will rocket the oil temperature. An amended invoice will then be sent. Designed for Motorsport use. No instructions are included. (Some fitting tips & tightening torques are included). PLEASE VIEW MY SHOP ITEMS. (The despatch date will be printed on the parcel address label). (Due to address queries/bad weather/locational errors etc). We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 9-5), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated if products fit other models its in our favour to say so! Are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated. Please allow 24h for us to respond to your question. Please also note the despatch. Times stated on the listing. Most of our products are NOT designed for DIY fitting and in some cases instructions are not included – we state this when applicable. We do not prioritise feedback, due the time consuming nature of the feedback we do them in blocks of 2-300 at a time after orders have been sent & questions answered. Despatching orders & answering questions are our first & second priority. Please be assured feedback will be left at our earliest convenience. The item “VW GOLF 1.8 TURBO 2.0 GTI STAINLESS BRAIDED HOSE ENGINE OIL COOLER KIT ZQMK” is in sale since Monday, November 13, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Engine Cooling Components\Engine Oil Coolers & Lines”. The seller is “mattyzx” and is located in Dorking. This item can be shipped worldwide.
  • Type: Oil Cooler Kit
  • Manufacturer Part Number: ZQMK-3/4UNF
  • Brand: MLR

Vw Golf 1.8 Turbo 2.0 Gti Stainless Braided Hose Engine Oil Cooler Kit Zqmk

Ford Focus Mk1 2.0 St St170 Rs Mocal S/s Braided Hose Engine Oil Cooler Kit Zqk

Ford Focus Mk1 2.0 St St170 Rs Mocal S/s Braided Hose Engine Oil Cooler Kit Zqk
Ford Focus Mk1 2.0 St St170 Rs Mocal S/s Braided Hose Engine Oil Cooler Kit Zqk
Ford Focus Mk1 2.0 St St170 Rs Mocal S/s Braided Hose Engine Oil Cooler Kit Zqk
Ford Focus Mk1 2.0 St St170 Rs Mocal S/s Braided Hose Engine Oil Cooler Kit Zqk
Ford Focus Mk1 2.0 St St170 Rs Mocal S/s Braided Hose Engine Oil Cooler Kit Zqk

Ford Focus Mk1 2.0 St St170 Rs Mocal S/s Braided Hose Engine Oil Cooler Kit Zqk
Engines With Metal Spin On Oil Filters Only. Focus Mk1 2.0 inc ST/RS. Not suitable for paper element/cartridge oil filters. Mocal -10 oil cooler kit with genuine Aeroquip red & blue or black reusable fittings and stainless steel braided or kevlar reinforced lightweight black motorsport hose. 10 row oil cooler m. Oil filter sandwich plate & seal. 2x sandwich plate adaptors & washers. Stainless Steel braided high pressure/temperature oil hose. 2x Aeroquip red & blue straight & 2x. Universal mounting brackets & fixings. In very cold/wet weather over cooling of the oil can be avoided by the addition of a thermostat built into the sandwich plate. Or the sandwich plate can be supplied with one gauge port. It is not possible to have a thermostat and a gauge port in the same sandwich plate. The hose and fittings supplied in this kit are designed for self assembly. The hoses can be made to the correct length to suit the individual application. A vice and spanner are all that’s needed to assemble professional, reliable hoses. 10 size hose and fittings are supplied in this kit to minimise oil pressure loss through the system. We do not recommend hose/fittings smaller than this are used on these models. Kit is also available with Aeroquip Startlite black hos. The kit can be supplied with an extra 1 or 2 meters of hose. FOR ADDITIONAL HOSE / FITTINGS – PLEASE SEE OUR SHOP ITEMS. Rough Guide: A 13 row cooler should be adequate to cool most naturally aspirated engines up to around 150bhp (for track use) given an installation with good airflow, after this a larger cooler will be required. For road use a 13 row oil cooler is usually adequate for engines up to approx 200bhp in all but extreme conditions, after this a larger cooler will be required. The overall width including mounting brackets is 330mm. Exact cooler size required depends upon: The type of use, ambient temperature, spec of the engine (internal friction, rev range, power etc), airflow through the cooler and over the sump. If you are using your car for any form of track, competition or high performance use then the engine oil will need cooling. The most common cause of competition / high performance engine failure is loss of oil pressure, as the oil heats up it becomes thinner. This lowers the pressure produced by the pump and increases the oil escape from the bearings lowering the overall pressure further still. Roughly speaking you need about 10psi of oil pressure per 1000rpm. 7000rpm requires 70psi oil pressure. If the pump cannot meet this demand when the oil is hot/thin engine failure will result – usually in the form of running a crank bearing (death rattle) or throwing a rod through the side of the block! This is especially important on part worn engines – a cooler/thicker oil will give the oil pump a fighting good chance of meeting the demand. On a new or part worn engine if the oil pressure is maintained, the engine isn’t over revved or over heated there is no reason for failure. For track, competition or high performance use a rough target temperature for the oil is around 100°C. Over 100°C the oil thins out rapidly and therefore drops the pressure. Turbo systems will rocket the oil temperature. An amended invoice will then be sent. Designed for Motorsport use. No instructions are included. (Some fitting tips & tightening torques are included). PLEASE VIEW MY SHOP ITEMS. (The despatch date will be printed on the parcel address label). (Due to address queries/bad weather/locational errors etc). We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 9-5), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated if products fit other models its in our favour to say so! Are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated. Please allow 24h for us to respond to your question. Please also note the despatch. Times stated on the listing. Most of our products are NOT designed for DIY fitting and in some cases instructions are not included – we state this when applicable. We do not prioritise feedback, due the time consuming nature of the feedback we do them in blocks of 2-300 at a time after orders have been sent & questions answered. Despatching orders & answering questions are our first & second priority. Please be assured feedback will be left at our earliest convenience. The item “FORD FOCUS MK1 2.0 ST ST170 RS MOCAL S/S BRAIDED HOSE ENGINE OIL COOLER KIT ZQK” is in sale since Thursday, August 17, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Engine Cooling Components\Engine Oil Coolers & Lines”. The seller is “mattyzx” and is located in Dorking. This item can be shipped worldwide.
  • Country/Region of Manufacture: United Kingdom
  • Type: Oil Cooler Kit
  • Manufacturer Part Number: ZQK-3/4UNF
  • Brand: Mocal

Ford Focus Mk1 2.0 St St170 Rs Mocal S/s Braided Hose Engine Oil Cooler Kit Zqk